DIY Round Clutch
[Runway DIY]
You will need:
- leather or faux leather
- metal zipper + ring/loop for the hand strap
- matching thread
- glue, pencil, cutter, scissors, ruller
1. Draw the pattern on the left side of the material. I used a plate for that purpose.
2. Cut out the 2 parts.
3. Cut the slit for the zipper.
4. Apply a thin line of glue around the slit on the left side of the material.
5. Glue the zipper to the material.
6. Sew around the zipper. Make sure to use a leather needle.
7. Put both parts together. Apply a thin line of glue to the edge for couple cm, then press the two parts together- edge to edge.
8. Repeat the step until the two parts glued together.
9. Sew the parts together.
10. Trim the edges if necessary.
11. Smooth the edge with some sandpaper.
12. Cut the hand strap.
12. Attach the hand strap to the zipper. You can secure it with a screw back spike or simply with some hand stitching.
For the tassel tutorial click HERE
Thanks for reading,
Xenia
……………………………………………………………………………………………………………………………………………….
3 Comments
ChelySparkles
10. February 2015 at 4:04 PMDeine Clutch- Ideen sind immer wieder wundervoll.
LG
Plook Fashion
7. May 2015 at 8:59 PMMe encanto tu Bolso…..
Sassy T
8. November 2015 at 5:27 PMTo be linked on SSB , Tuesday. I have earmarked this project to try myself. Sassy Sewing Bees https://www.facebook.com/SassySewingBees